Eagle, PCB-GCode, Linux-CNC

|
| Comments (0)
Initial pcb milling attemptThis is the results I got from the following pcb-gcode settings:

General Options (1st tab)
 Milling depth: -0.01
 Isolation
  Default: 0.001
  Maximum: 0.01
  Step size: 0.015

 Etching Tool Size: 0.02

Machine (2nd tab)
 Z Down: 0.007
 Feed Rates
  X Y: 2.0 in / min

Any comments on better settings would be appreciated.

Leave a comment